Sapling SAM-Series Synchronous Analog Wall Clocks
SPECIFICATIONS
- Microprocessor based movement
- Two (2) wire or three (3) wire system
- Automatic communication protocol identification. The clocks recognize:
- Three (3) wire digital communication
- Two (2) wire digital communication
- Sync-wire 59 minute correction
- Sync-wire 58 minute correction
- Sync-wire National Time and Rauland
- Automatic frequency detection
- Diagnostic LEDs for ease of maintenance
- Fully automatic plug and play; No settings required
- Built-in self-test function
- Automatic polarity detection
- Remote system diagnosis
- Quick correction for time change (max. five (5) minutes)
- Clocks will not deviate from each other
- Hour, minute and seconds hands
- Energy efficient:
- 20 mA@ 24VAC
- 15 mA@110 VAC
- 10 mA correction
- Wide dynamic range for input voltage
- 7 VAC – 28 VAC (24V model, three (3) wire system)
- 85 VAC – 135 VAC (110V model, three (3) wire system)
- Low profile – one (1) model for flush and surface mount
- No need for custom back box
- Plug in Molex connectors
- Smooth surface metal case (custom colors available) or smooth surface ABS plastic case
- Side molded, polycarbonate crystal
- Available in 110 VAC and 24 VAC
- UL, cUL listed and FCC approved
- Made in U.S.A.
Description
Sapling SAM-Series Synchronous Analog Wall Clocks
The Sapling SAM Series clock features self–diagnostic capabilities for protocol detection, last received communication time and a comprehensive analysis of the entire clock. The SAM-series is capable of remote diagnostics from the master clock. The clock features automatic polarity detection, as well as a maximum correction time of five (5) minutes.
The SAM-Series Clock is designed to be used in either a two (2) wire or three (3) wire system with Sapling 2000 or 3000 Series Master Clock systems, as well as the SSM Master Clock, which can regulate it by Sapling digital communication protocol.
Upon receipt of the digital signal, the clock will immediately self–correct. The SAM-Series clock can accept sync–wire communication protocols with hourly and daily correction. The movement is microprocessor based for reliability.
The clock is constructed with a low–profile, semi–flush smooth surface metal case. The crystal is shatterproof polycarbonate material with no visible molding marks. The SAM-Series mounts to a standard single gang box. The clock features black hour and minute hands, as well as a red second hand. The SAM-Series clock is fully UL, cUL and FCC compliant.
