Description

Honeywell-ADEMCO VISTA-128FBP
Commercial Fire and Partitioned Burglary Alarm Control Panel

Designed to integrate seamlessly with CCTV, access control, and Honeywell-ADEMCO’s full range of fire and burglary components, the VISTA-128FBP provides the ultimate protection of life and property.

The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform.

The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels – even buildings to be armed, disarmed and have status checked from one location.

The VISTA-128FBP alarm system meets all applicable requirements for UL commercial fire and burglary installations.

FEATURES

• Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
• Can control eight separate areas independently (8 partitions)
• Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
• Supports commercial UL wireless fire and burg
• Stores up to 512 events and can accommodate 150 user codes
• Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
• Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
• Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
• Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
• Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
• Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
• Automatic smoke detector sensitivity maintenance testing
• 4-wire smoke reset using onboard J2 output trigger
• Supports Dynamic Signaling for LRR
• Supports Remote Control-via the internet**
• Supports Internet Alarm Reporting**
• Supports the new Graphical User Interface Consoles
• Supports up to 250 access card holders using VistaKey
• Supports AlphaNumeric pager up to 8 different numbers using the VA8201

* Connects to Passpoint Access Control Systems. Maximum 32 doors.

** When used with AlarmNet-i

ADDITIONAL FEATURES

• Notification Appliance Circuits (two):
  – Programmable
  – Temporal code compliant
  – Individually silenceable
• Programmable on-board auxiliary relay
• SIA false alarm reduction features:
  – Exit error logic
  – Exit delay reset
  – Cross zoning
  – Call waiting defeat
  – Recent close report
• Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
• Hardwired zones
  – Provides eight style B hardwired zones
  – EOLR supervised for Fire and UL burglary installations
  – Supports N.O or N.C. sensors
  – Individually assignable to any eight partition
  – Up to 32 two-wire smoke detectors each on zone one and two (64 total)
  – Up to 50 two-wire glassbreak detectors on zone eight
• Patented addressable V-Plex polling loop technology
  – Supports 120 two-wire zones points
  – Global polling technology for faster processing
  – Increased current draw capacity (128mA)
  – Supervised by panel
  – Individually assignable to partitions, notification circuit (bell) output or aux relay
  – 4,000 ft capability without the use of shielded cable
  – Extender/Isolation bus module
  – Two-wire smoke detector zone/group expansion module adds two or four zones
  – Eight zone – Class A and B extender module
  – Eight zone – Class B extender module
  – One zone supervised contact monitor module
• UL Listed wireless expansion
  – Supports up to 128 wireless zones/points using 5881ENHC receiver
  – Supervised by control for check-in signals
  – Tamper protection for transmitters
  – Individually assignable up to eight partitions
  – Supports UL864/NFPA approved wireless smoke detectors
• Access Control integration
  – Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
• Up to 8 doors using VistaKey V-Plex Access Control
• Event reporting
• Local printer of access or VISTA related event
• Scheduled uploading of events to central station
• Stored events for one call retrieval
• Communication
  – Phone mapping by zone response type
  – Supports VIP interactive phone voice module
  – Panel operation during download
  – Uploading equipment list to central station
  – Communication to PassPoint via Vista Gateway Module
• CCTV integration
  – Supports VistaView-100 ECP based CCTV switchers

APPLICATIONS

The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.