Call: 1-800-205-6635

SK-ACP

HomeBrowse Our ProductsAccess ControlSK-ACP

SK-ACP

The Secura Key SK-ACP-LE is a two door access control unit that accepts Wiegand readers with almost any card technology, including Proximity, Touch Card, Wiegand, Magnetic Stripe, Bar Code, Optical and Biometric.

Categories: , , Product ID: 2253

Secura Key SK-ACP-LE Door Access Control Specifications

.

POWER REQUIREMENTS ·        16.5-24 VAC, 20 VA or 16-30 VDC, 100 mA plus reader current draw
BACK-UP BATTERY ·        12 V, 1.2 – 6 Ah (Optional)
CARD READERS ·        Two card readers with two-line Wiegand output, up to 40 bits.  Provides 14 VDC, 150 mA max. power for each card reader.
SOFTWARE ·        SK-NET Software Version 2.0 or greater
OUTPUTS ·        2 Per Door (Total of 4) Latch & Alarm Shunt DPDT contact, 2A up to 220 VAC or 30 VDC
INPUTS – ·        2 Per Door (Total of 4) Auxiliary 1 Requires SPST contact closure.  Auxiliary 2 Requires SPST contact closure
COMMUNICATION ·        RS-232:  5-Wire Shielded Cable, up to 38.4K baud, full duplex, (8N1) – up to 100 ft.

·        RS-485:  Single Twisted Pair, shielded cable with a signal ground – up to 4000 ft.

·        Wiegand Input:  (2) Programmable up to 40 bits 14 VDC @ 150 mA supplied to each reader,

·        Modem:  Requires Hayes compatible – 1.2 to 38.4k baud

·        LAN:  Requires external device server

·        Printer:  Serial Printer (or Parallel printer with serial converter)
ENVIRONMENT ·        Ambient Temperature -40° F to 158° F (-40° C to 70° C)

·        Humidity 0% to 95% relative humidity (non-condensing)
OPERATIONAL

 (PER DOOR) 

 ·        Card Capacity: 65,535 / Door (Highest card number = 65,535)

·        Time Zones: 15 for card access, one door unlock; full week plus holiday in one-half hour segments; 32 programmable holidays; selectable automatic daylight saving time.

·        Facility Code:  Up to 16 different codes simultaneously (max. # of cards: 65,535)

·        Latch/Alarm Shunt Timer:  Programmable from 1/4 to 30 seconds

·        Antipassback: Real or Timed (1 to 30 minutes); hard or soft

·        Auxiliary Inputs:  (2) Programmable for door monitor, tamper monitor, remote open, remote inactive, bell, arming circuit or user defined

·        Auxiliary Output: (1) Output is programmable to activate under one of many possible alarm conditions, time zone or card violations.

·        Limited Use Cards:  4,000 (in a block within 65,535) programmable from 1-500 uses, days, weeks or number of days after first use.

·        Transaction Storage: 4,864 events

·        Memory:  Non-volatile

Description

Secura Key SK-ACP-LE Door Access Control Panel

The Secura Key SK-ACP-LE Advanced Control Panel is a highly sophisticated, yet simple to use, two door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology, including Proximity, Touch Card, Wiegand, Magnetic Stripe, Bar Code, Optical, and Biometric.

Each of the two doors controlled by the SK-ACP-LE is completely independent of the other and is configured, programmed and viewed separately. Each has a separate node address. Each door has two programmable inputs which may be programmed to function as a door open, remote inactive, door monitor, tamper, arming circuit, door unlock, or user defined input. Each of the two doors also has two outputs. One output is the relay that activates the door operating device. The other output is programmable to activate under one of many possible alarm conditions, time zone or card violations.

As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer.

Over 100 SK-ACP-LE units may be connected together to control over 200 passageways with SK-NET software, using a single twisted pair RS-485 bus. SK-NET software allows integration of the units into a full featured Windows-based, access control system.

Related products

Stay Tuned!