R-Series Ceiling Speaker

Lowell’s R Series 12W speaker assemblies are an excellent choice for quality general purpose paging and distributed music applications.

Category: Product ID: 2314

 Lowell R-Series Ceiling Speaker Specifications

PERFORMANCE  
Power Handling ·        12 watts RMS (nominal) measured per EIA Standard RS-426A
Sensitivity ·        98dB SPL (peak), 93dB SPL (avg) measured 1Watt/1 Meter
Impedance ·        8 ohms (nominal), 8.6 ohms @235Hz (minimum)
Freq. Response ·        55Hz-12.5kHz (+6dB)
Dispersion Angle ·        120° @ 2000Hz octave (-6dB)

PHYSICAL – WOOFER  
Magnet Weight ·        5oz. (134g)
Magnet Material ·        Strontium ferrite ceramic
Voice Coil Diameter ·        1 inch (26mm)
Voice Coil Material ·        Copper wire
Cone Material ·        Dual cone paper with self edge surround
Terminals ·        Quick disconnect type – spade lugs

MECHANICAL  
Grille / Baffle ·        22 gauge perforated steel
Outside Diameter ·        WB-8 (Round):  12.875” Diameter

·        SG-8 (Square): 11.428” x 11.428”

Transformer ·        25v, 70v, or 25v/70v Combo
Transformer Taps ·        .25, .5, 1, 2, 4 Watts or .5, 1, 2, 4 Watts

(Model Dependent)

Finish ·        White Powdercoat

Description

Lowell R-Series Ceiling Speakers

Lowell’s R Series 12W speaker assemblies are an excellent choice for quality general purpose paging and distributed music applications.

The R Series 12W assemblies are comprised of a factory assembled 8″ dual cone driver (Model 805) with a wired 25V, 70V, or dual voltage transformer, four choices of mounted grille, and optional volume control feature with knob style or screwdriver adjustment in the center of the grille. Speaker / transformer assemblies are manufactured to assure consistent performance with clear intelligibility and wide dispersion.

The dual cone Model 805 driver has a power rating of 12 watts RMS and employs a 5 oz. ceramic magnet. The cone is molded of a high fibre content material to provide a smooth, extended frequency response and a clean, natural sound.

To facilitate a variety of distributed applications each assembly includes a wired 25V or 70V transformer with .25, .5, 1, 2, and 4 watt taps; or a dual voltage 25/70V transformer with .5, 1, 2, and 4 watt taps.

Stay Tuned!