Secura Key SK-KPM Digital Keypad Specifications
| Power Requirements |
· 12-28 VDC, 30mA |
| Output – Wiegand |
· Data 1 & Data 0 open collector 1K ohm. Pull up to internal +5V |
| LED Control |
· LED Bicolor (red and green) |
| CCTV Interface |
· Activated by Key Press – Open collector 250 mA. 30-Second Duration |
| Tamper |
· Photo Diode Sensor. Open collector 100 mA. Pulled “low” when light sensed |
| Hold |
· Ground to Activate causes data to be held in keypad buffer when pulled “low” |
| Environmental |
· Ambient Temperature -40° F to 257° F (-40° C to +125° C)
· Humidity 100% (IP68) |
| Cable Required |
· 500 ft. Maximum, 5-9 Conductor 20 AWG shielded cable. |
| Dimensions |
· 7.25”H x 1.75”W x .875”D |
| Weight |
· 8.8oz |
| Material |
· Aluminum |
| Finish |
· Natural |
Description
Secura Key SK-KPM Digital Keypad
The Secura Key SK-KPM is a digital keypad with a Wiegand output for use with the SK-ACP, as well as with many other access control systems. Personal Identification Numbers (PINs) are sent to a controller via industry-standard 26 bit Wiegand communications.
Secura Key keypads are virtually indestructible. Solid-State piezo technology means no moving parts and no buttons to damage or wear out. The one piece metal housings are fully potted for IP68-rated water-resistance and the anodized graphics never wear off. The SK-KPM is narrow enough to mount to most mullions and door frames.
The SK-KPM combines the convenience of a digital keypad with the advanced features and superior security of a true access control system. These keypads do not operate as standalone units.
- No Moving Parts
- Solid Metal Housing
- Vandalproof
- Tamperproof
- Weatherproof
- Meets MIL Standards
