CORNELL 4100 RESCUE ASSISTANCE SPECIFICATIONS
Wiring Requirements
- 22-gauge (minimum) wire.
- Four conductors are required between each Call Station and the Annunciator Panel not to exceed 3000 feet.
- Power wire shall be 18-gauge (minimum).
- Two conductors are required between the Power Supply and the Annunciator Panel not to exceed 500 ft.
- The TAK-4200 requires a 120V AC outlet and an external telephone line.
Hardware
Model Zones Panel Size Backbox Backbox Size
| A-4104*
A-4108*
A-4112*
A-4116*
A-4120* |
4
8
12
16
20 |
5-gang plate
5 ½ ” H x 19” W
8 ½ ” H x 19” W
8 ½ ” H x 19” W
12 ½ ” H x 19” W |
BB-03
BB-05
BB-05
BB-07
. |
Five Gang Box
4 ½ ” H x 17” W x 3 ½” D
7 ¾ ” H x 17” W x 3 ½” D
7 ¾ “ H x 17” W x 3 ½” D
11 ¼ ” H x 17” W x 3 ½” D |
| 4101A
4101/V |
Unlimited
Unlimited |
Single Gang Plate
Two Gang Plate |
Single Gang Box
Two Gang Box |
Description
Cornell Series 4100 Rescue Assistance Systems
Cornell Rescue Assistance Systems are emergency alert and evacuation systems designed to enable persons with disabilities to summon evacuation assistance in multi-story commercial buildings and public accommodations.
The Series 4100 consists of zone or floor call stations (available in 4, 8, 12, 16, 20, or 24 zone sets) and a central annunciator station which shows the status of each zone. The system is designed to accommodate an unlimited number of zone stations.
To summon assistance, the user presses a button on the call station. A loud, clear tone is emitted and the zone indicator lights at the central station. When the call is acknowledged at the central station, a light and sound signal at the call station notifies the caller that the request for assistance has been heard. In the event that building power lines are faulted, a yellow indicator light and intermittent tone notifies the central station. Once the emergency is resolved, the call stations are reset from the central station simply by pressing the acknowledge button a second time.
The call stations and the central station are constructed of stainless steel and anodized aluminum with permanently silk-screened labels and designations.
- POWER: Uses standard building wiring and power. Transformer and battery backup power supply are also available.
- OPTIONS: A full range of finishes and materials to suit any decor are available at extra cost.
- DIMENSIONS (HxW): The master panel for the 4100 Series ranges from 4.5 x 10 inches to 12.5 inches depending upon the number of zones monitored.
