SPECIFICATIONS:
Operating Temperature: 32°F to 140°F**
Relative Humidity: 0 % – 95 % non-condensing.
Relay Output: Two Relays- Form C dry contact 120VAC/10A, 24VDC/10A or 250VAC/7A. Programmable output 1 – 98 seconds.
Dimensions: Surface: 13-9/16 “(H) x 11-1/4 “(W) x 3-3/4 “(D).
Full-flush: 13-3/4”(H) x 11-9/16”(W) x 3-3/4″(D)
Mounting Ring (full-flush):
Inside: 13-7/8” (H) x 12”(W) x 3-11/16”(D)
Outside: 18” (H) x 15-5/8” (W)
Construction: 16 Gauge Cold Rolled Steel back box with enamel finished and Brushed Stainless Steel Faceplate.
**Optional Heater (Model AHP5) is required if the ambient temp. falls below 32°F
Description
Pach & Co. Aegis NPB9000 Non-Subscriber Telephone Access Control System
The Pach & Co. Aegis NPB9000 Hands-Free Multi-Tenant Non-Subscriber Telephone Access Control System is available in multiple configurations from 100 to 1000 tenants and 200 to 1000 personal access codes. Programming is done locally via the system’s keypad or remotely via a touch-tone phone.
Non-subscriber Telephone Entry systems DO NOT require a dedicated phone line from a telecom service provider. The installation uses pre-existing telephone wires, eliminating the trouble and expense of providing new lines. The system utilizes its own distinctive ring to differentiate the entry system from outside callers.
On site programming is done via the system’s keypad or RS232. Dial-up remote programming is achieved via Windows-Compatible Pach and Company Software. A telephone company dial tone is required for dial-up remote programming.
This unit interfaces with a maximum of 32 devices, including: Pach and Company Satellite Card Reader (SCR9), Satellite Keypad (SK9) and the RS-485 Wiegand Reader Controller Module (AWCRM).
FEATURES:
- Recessed Keypad w/ Built-in night light.
- Brushed Stainless Steel faceplate.
- Backlit Two Line Liquid Crystal Display (LCD) with Electronic Directory.
- Postal Lock ready.
- Surface and full-flush Mount, outdoor or indoor.
- Built-in charging circuit for optional12VDC 4Ahr rechargeable Emergency Back-Up Battery
- The System supports from 25 – 1000 tenants and 200 – 1000 restricted or non-restricted keypad access codes, cards or transmitters.
- Local Access is supported by any combination of keypad code and proximity card, or an active transmitter.
- A 26-Bit Wiegand Card Reader or Radio Receiver is optional (required for card or transmitter functions).
- 10-Time Zones, 10-Door Timers (auto unlock schedules), 16-Holidays.
- Manual Unlock/lock timer 01- 98 hours.
- Programmable Talk Time 10 – 240 sec, timer maybe restarted by pressing #.
- Programmable relay output contact 04-99 seconds.
- Programmable second relay for Door Control, Shunt, Alarm Timer or CCTV Switch.
- Distinctive ringing and call waiting.
- Programmable DTMF (1-9) tone for remote Access.
- 1200 event transactions buffer.
- Door Sensor Input.
- Built-in Modem, RS232 and RS485.
- Alert alarm and security guard notification upon repeated entry of invalid codes.
