Telecor’s eSeries provides a network-based communication solution for intercom, paging, synchronized clocks, tone signaling, emergency messaging, and integration with a facility’s IP phone system–all on the existing IT infrastructure.
eSeries devices are designed to minimize service and maintenance costs. Expanding a system is simple: just plug in additional devices to any POE switch on your network. eSeries uses Ethernet technology to pass power and data over a facility’s Ethernet network. This ensures simplified network planning and easy installation.
PoE endpoints connect directly back to a network switch with a single CAT 5/6 connection. The simplicity of Telecor’s design means eSeries does not require any network configuration or administration, eliminating IP address and DHCP server requirements. The decentralized network structure means no head-end, central server, or control equipment is required.
Endpoint device connections are supervised so if there are any problems or loss of communication, notifications are sent to consoles indicating the fault type and source.
High definition audio ensures crystal clear voice communications and outstanding music broadcast quality. Peer-to-peer technology provides practically an unlimited number of speech channels with unrestricted access to any device on the system.
Telecor’s eSeries provides the flexibility and scalability to meet almost any facility’s needs.
Telecor eStations are network-based wall intercom stations used to establish communication between specific areas of a facility. The eStations are available in zero, one, two, and three-button models.
The Telecor eSeries uses Power-over-Ethernet technology, Just Plug It In! design, and a decentralized network structure to ensure easy wiring and simplified network planning. The use of Power-over- Ethernet technology allows the eStations to be plugged into a PoE network switch to supply both power and data. The simplicity of Telecor’s Just Plug It In! design means eStations do not require any network configuration or administration, eliminating IP address and DHCP server requirements. The decentralized network structure means no head end, central server or controller equipment is required.
Once plugged into the LAN, the eStations can place calls to all eConsoles, or to all Two and Three Button eStations if there are no eConsoles present. Speech is transmitted through the eStations in crystal-clear HD Audio. Audio is transmitted in the frequency range from 50 Hz to 7 kHz while using only 128 kbps of bandwidth during a call. Audio between stations and consoles is non-blocking, allowing a virtually unlimited number of audio channels across the LAN and reducing or eliminating busy signals. Telecor’s eStations can further be configured to suit the building application.
eStations equipped with a Push to Call button can have their call-in destinations configured. Some eStations also have the unique ability to be configured to receive call-ins; acting like a Master Console. Also, certain eStation models also
have a dry contact output, allowing the network of eStations to be customized to suit many applications. For example, eStations can be used in a door-to-door intercom application where there are eStations located on both sides of a door. Voice communication can be established between the eStations and, furthermore, the eStation with the dry contact output can be utilized to open the door.
Additionally, eStations also have a call-in roll-over feature. If a call-in to the primary call destination is not answered after a preset amount of time, the call will automatically be copied to a secondary call destination. If both the primary and secondary call destinations are unavailable, the call is redirected to a back-up eStation or eConsole.
The wall mounted eStations are constructed with rugged 11 gauge stainless steel faceplates to withstand physical damage and everyday wear and tear. The buttons are tamper-proof and the overall assembly is designed to be vandal-proof. A G3 weather-seal gasket is available as an additional option to weatherproof the eStations.
The e300 eConsole is a master station that is used to easily establish intercom communications with any intercom station, initiate live paging announcements, or select and send pre-recorded notifications to any area of the building.
Users have a choice of speaking hands-free or holding a private conversation using the handset. The 2×20 character LCD screen displays information about incoming or outgoing calls.
Feature keys make it simple for users to scroll through a list of incoming calls, select a paging zone for an announcement, or select a source for broadcasting an audio program to a specific destination.
Telecor’s eSIP Interface integrates the building’s IP-PBX telephone system to the eSeries system and allows the facility’s phones to be used as an extension of the eSeries system.
Phones can place or receive calls to eSeries devices as well as initiate paging announcements throughout the facility.
The use of SIP protocol makes it easy to connect virtually any third party VoIP PBX to the eSeries system.
The eAMP is a 25 watt amplifier that adds paging and public address capabilities to the eSeries Intercom System. It is designed to receive audio signals from either the eSeries network or a local input and broadcast them over conventional speakers and/or back into the eSeries network for broadcast to other eSeries devices.
The eAMP also has the ability to store and play pre-recorded announcements or tones to its speakers or over other eSeries devices connected to the network. Activation can be done by the master clock, external contact closures, or from the e300 eConsole.
Each eAMP is intended to provide one zone of paging. For larger applications, multiple eAMPs can work co-operatively on the network to support a comprehensive zone paging system. Each eAMP also has the ability to connect to a higher powered conventional amplifier to drive higher loads.
Whether you need to bridge communication to the office next door or implement a communication system across multiple buildings of a large campus, Telecor’s eSeries provides an all-in-one communication solution that meets your needs and exceeds your expectations.